Enabling fast infrared (fir), Enabling fast infrared (fir) -11 – chiliGREEN M57xRU User Manual
Page 49
Storage Devices, Mouse, Audio & Printer
Enabling Fast Infrared (FIR) 2 - 11
2
Enabling Fast Infrared (FIR)
If you wish to enable and use the fast infrared transceiver then follow the procedure out-
lined below.
Enable the FIR Device in the BIOS
1.
Restart the computer.
2.
Enter the PhoenixBIOS Setup Utility by pressing F2 during the POST.
3.
Use the arrow keys to select the Advanced menu.
4.
Select I/O Device Configuration and press Enter to open the sub-menu.
5.
Select FIR Device and press the spacebar to set the option to Enabled.
6.
Press F10 > Yes to save the changed BIOS information, exit the BIOS and restart the
computer.
Enable the FIR Device in Windows Vista
1.
Click Start, and click Control Panel (or point to Settings and click Control Panel).
2.
Double-click Infrared (Network and Internet).
3.
Click Hardware (tab).
4.
Click to select IrDA Fast Infrared Port, and click Properties (button).
5.
Click Change Settings (General).
6.
Click Advanced (tab) and select Infrared Transceiver A.
7.
Change the Value to “HP HSDL-2300/3600”.
8.
Click OK > OK.
9.
The FIR device will now be enabled.