7 connectors, 1 back panel connectors, Connectors – chiliGREEN D945GBO User Manual
Page 52: Back panel connectors, Location of the standby power indicator led
Intel Desktop Board D945GBO Technical Product Specification
52
2.7 Connectors
CAUTION
Only the following connectors have overcurrent protection: back panel USB, front panel USB, and
PS/2.
The other internal connectors are not overcurrent protected and should connect only to devices
inside the computer’s chassis, such as fans and internal peripherals. Do not use these connectors
to power devices external to the computer’s chassis. A fault in the load presented by the external
devices could cause damage to the computer, the power cable, and the external devices themselves.
This section describes the board’s connectors. The connectors can be divided into these groups:
• Back panel I/O connectors
• Component-side I/O connectors (see page 54)
2.7.1 Back Panel Connectors
Figure 15 shows the location of the back panel connectors. The back panel connectors are
color-coded. The figure legend (Table 15) lists the colors used (when applicable).
OM17558
A
C
H
D
F
G
I
B
E
N
M
O
L
K
J
Figure 15. Back Panel Connectors