chiliGREEN ArcSoft TotalMedia 3.5 User Manual
Page 47
ArcSoft TotalMedia™ Manual
45
CAPTURE
Capture video from your camcorder, VCR, or other supported device.
Follow the onscreen prompts to get your video ready for recording. When you're ready, click
"Next."
Before you begin to capture video, you may wish to verify your capture settings. Click the Settings
button to do so.
•
Enter a file name for the video you are about to capture (click the “A_” button to access a
virtual keyboard).
•
Set the capture duration.
•
To automatically burn your video to disc after it has been capt ured, check the
"Automatically create a disc..." box.
•
When you're ready to begin capturing video, click "Capture."
Note: If you’
re capturing video from a DV camcorder, you will be prompted to choose a recording
format (DV-AVI or MPEG-2). Depending on your choice, various options will be available.
You can also capture a single frame as a still image by clicking "Capture Frame."
Capture Settings
Modify settings for capturing video:
•
For video capturing, you can set the Video Device, Input Source, Video Standard, and
Closed Caption support according to your device.
•
Click "Auto Detect Video Signal" to let the program detect your video input (S-video,
composite, etc.) automatically.
•
Check the "Don't show capturing instructions" box to bypass the help screen when capturing
video.
When you're ready, click "Save", or click "Cancel" to exit without saving.