chiliGREEN ArcSoft TotalMedia 3.5 - Manual (Page 8)

ArcSoft TotalMedia™ Manual
6
TV MODULE
This section lets you view and edit the settings for TV recording.
When you watch TV for the first time, the application will prompt you to configure the TV signal.
After configuration is complete, you can use your remote control to change channels, or use the
channel controls (+/ - button) in the floating toolbar at the bottom of the screen.
Note:
• If you are using a digital tuner and have channels scanned using LCN (Local Channel
Number, available in most European countries), you can use LCN to select a channel.
• If you have two TV tuners installed in your system, you can enable PIP to have two
programs displayed on the screen. You can use the control buttons on the floating toolbar to
change the display mode as well as the size of the PIP window. Note that this feature may
not be available in all versions of the program.
You may pause and rewind TV (while you’ re watching) using both the remote control and the
toolbar.