COATS Kit 85000248 Motorcycle Shaft Kit User Manual
Warning
85000250 00 07/06 1 of 2
© COPYRIGHT 2006 ALL RIGHTS RESERVED PRINTED IN U.S.A.
To avoid electrical shock, ALWAYS discon-
nect unit from electrical power before per-
forming any service or maintenance on the
components.
Instructions
1. Turn balancer off and unplug from power source.
2. Using a wrench, loosen counterclockwise the
14mm balancing shaft. Then manually unscrew the
14mm shaft from mounting collar.
3. Loosen and remove wheel clamp cap screws
from balancer pressure cup. Slide wheel clamp off bal-
ancer stub shaft.
4. Remove retaining cap screws from wheel clamp
shaft collar and set aside.
5. Slide clamp centering spacer onto balancer stub
shaft.
WARNING
M
Mo
otto
orrc
cy
yc
clle
e S
Sh
ha
afftt K
Kiitt 8
85
50
00
00
02
24
48
8
F
Fo
orr u
us
se
e w
wiitth
h 7
70
00
0 W
Wh
he
ee
ell B
Ba
alla
an
nc
ce
err
COATS, Inc. • Hennessy Industries • 1601 J.P. Hennessy Drive, LaVergne, TN 37086-3565
(800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX • www.ammcoats.com
Loosen Cap Screws
from Pressure Cup