COATS Kit 85000248 Motorcycle Shaft Kit - Manual (Page 2)

6. Reinstall wheel clamp with cap screws onto pres-
sure cup. Be sure centering sleeve protrudes through
clamp and screw 1-inch accessory shaft into motor
plate stub shaft.
7. Hold wheel clamp and tighten 1-inch shaft clock-
wise.
8. Now, plug balancer into power source and turn on,
then verify correct operation.
85000250 00 07/06 2 of 2 © COPYRIGHT 2006 ALL RIGHTS RESERVED PRINTED IN U.S.A.