COATS ProRide Wheel Balancer - Manual (Page 24)

20 • Important: Always read and follow instructions.
Runout
Runout result screen.
Behind Spokes
Enable split function of out of balance (see Behind
Spokes).
Indicate Exact Corrective Weight Position
If laser disabled, indicates and locks arm when in
correct horizontal plane (see Indicate Exact Corrective
Weight Position).
Special Functions
Selection of special functions.
Balancing Spin
Lower hood, then spin wheel to check balance.
Stop & Exit
Return to Home screen
Behind Spoke
“Splitting” weight is used to hide any adhesive weights
behind the rim spokes.
Figure 20 - Behind Spoke Screen
Press button
LASER OFF: to split the out of balance detected in
two different positions, proceed as follows:
1. Position static out of balance or ALUS external side
in the correction position and press button :
2. Select a spoke close to the 12 o’clock position to
be corrected, move it into the 12 o’clock position and
press button
.
3. Turn the wheel in the rotation direction indicated on
the out of balance display, bringing the second spoke to
the 12 o’clock position and press button .
Turn the wheel in direction of rotation.
Turn the wheel in reverse direction of rotation.
4. At this stage, the screen shows the graphic display
of the correction spokes with the relative weight of the
out of balance detected.
5. Position the spokes indicated on screen in the 12
o’clock position and correct with the value displayed.