COATS ProRide Wheel Balancer - Manual (Page 27)

Important: Always read and follow instructions. • 23
Figure 25 - Runout Diagnosis Screen
The following buttons are enabled:
Graphics
To display the graphs of the runout program.
Match Balance
To go into the Match Balance procedure.
Result Screen
To go to the result screen (the symbol above the button
is displayed in yellow to indicate an excessive
first harmonic eccentricity value).
If the first harmonic eccentricity is within the permitted
limit, the graphs can in any case be displayed by press-
ing the buttons / from the result screen:
Figure 26 - Radial eccentricity measurement graph:
Figure 27 - Radial and lateral eccentricity measurement graph.
BLUE GRAPH: represents the peak/peak eccentricity
whose actual value is displayed and updated by turning
the wheel in correspondence to the word “Cursor”.
RED GRAPH: represents the first harmonic eccentricity.
For a wheel in optimal conditions, this graph must come
close to a straight line.
Under result screen the following buttons are enabled:
➤ Match Bal.
To go to rim runout measurement.
➤ Print
To print the runout values measured (option).
➤ Exit
Return to the previous screen.