COATS 6401 Computer Truck Wheel Balancer - Manual (Page 7)

Before You Begin
Receiving
The shipment should be thoroughly inspected as soon as it is
received. The signed bill of lading is acknowledgement, by the
carrier, of receipt in good condition of the shipment covered by
our invoice.
If any of the goods called for on this bill of lading are shorted
or damaged, do not accept them until the carrier makes a nota-
tion of the shorted or damaged goods on the freight bill. Do this
for your own protection.
NOTIFY THE CARRIER AT ONCE if any hidden loss or damage
is discovered after receipt and request him to make an inspec-
tion. If the carrier will not do so, prepare an affidavit to the effect
that you have so notified the carrier (on a certain date) and that
he has failed to comply with your request.
IT IS DIFFICULT TO COLLECT FOR LOSS OR DAMAGE AFTER
YOU HAVE GIVEN THE CARRIER A CLEAR RECEIPT.
File your claim with the carrier promptly. Support your claim
with copies of the bill of lading, freight bill, invoice, and photo-
graphs, if possible.
Although COATS ® responsibility ceases upon delivery of the
shipment to the carrier, we will gladly assist in tracing lost ship-
ments. Our willingness to assist in every possible manner does
not make COATS
® responsible for collection of claims, or
replacement of lost or damaged materials.
Electrical Requirements
The balancer requires a 220 VAC, 60Hz, three-phase power
supply with 20 amp fuse or circuit breaker, or a 220 VAC, 60 Hz,
single-phase power supply with 20 amp fuse or circuit breaker.
The three-phase balancer is equipped with an approved cord
and a 4-prong grounding plug to fit a Hubbell 2420 or Bryant
71520 grounding receptacle (not included).
The single-phase balancer is equipped with an approved cord
and a 3-prong grounding plug to fit a Hubbell 2320 or Bryant
grounding receptacle (not included).
The receptacles should be installed by a qualified electrician in
accordance with state and local codes.
Direct Drive
COATS 6401 Truck Wheel Balancer • 1