Comark N9005 - Manual (Page 14)

13
Deep Fat Probe
For temperature measurement in deep fat fryers. This probe is
made from a very flexible material that can be reshaped time
and time again. Crank the shaft of the probe so that the fat
temperature can be measured without your hand needing to be
above the fat itself. Never take the measurement with your hand
directly above the fat. Take adequate precautions. Remember
the probe will be very hot on withdrawal from the fat. Order:
IT21L
FIG.5 IT21L DEEP FAT PROBE
(MAX. TEMP. +400°C)
Pallet Probe
This probe allows the measurement of the temperature of
cartons on a pallet. By carefully sliding the flattened surfaces of
the probe between adjacent cartons their temperature can be
sampled without the need to unstack the pallet. Order: ST38L
FIG.6 ST38L HEAVY DUTY PALLET PROBE
(MAX. TEMP. +250°C)
Food Simulant Probe
The simulant has been designed to replicate the temperature
characteristics of the most temperature sensitive packaged
food. Left permanently in place it gives ultimate confidence that
the most representative method of monitoring is being used.
Order: DX31L
FIG.7 DX31L FOOD SIMULANT PROBE
(MAX. TEMP. +70°C)