Comark N9005 - Manual (Page 9)

8
9. SET UP MENU
The N9005 and N9094 thermometers have a hidden menu
structure that is used to set up a number of parameters within
the instrument.
The Set Up Menu can be entered when the instrument is
switched on.
If the instrument is already on, it must be turned off.
Press the countdown button and keep this held down while
pressing the on button to switch the instrument on. After the
thermometer has completed its self-checks, it will enter the
menu.
N.B. After each menu item use the ON/OFF button to save and
move to the next menu item.
Clock selection is the first item in the menu:
9.1 Clock – the display will show ‘CLOC’
Use the countdown timer button and the hold button to
adjust the clock time up or down. The clock itself is a 12
hour clock with setting for AM or PM. Moving through 12
noon will change the clock from AM to PM and so on.
9.2 Countdown Timer – the display will show ‘Cd’
Use the countdown timer button and the hold button
to select timer on or off. Use the hold and countdown
timer buttons to scroll up and down in seconds up to 5
minutes then in 1 minute intervals up to 24 hours.
9.3 Scale – the display will show ‘SCAL’
After entering the SCALE menu, use the countdown
timer button and the hold button to scroll between the
available scales.