COATS RC150EX, RC200EX Tire Changer User Manual
Page 14
10 •
Important: Always read and follow operating instructions.
Special Instructions For Mounting
Extremely Wide Motorcycle Tires (RC200)
201.
Mount the first bead as a typical tire. Note that
many tires may be pushed over the rim flange manually
after lubricant has been applied.
202.
For the top bead, lubricate the bottom side of
the top bead and the edge.
203.
Lubricate the rim completely in the drop center
area.
204.
Position the bead onto the duckhead and using
the RoboArm, press the bead down into the drop center
of the wheel forward of the duckhead.
205.
Rotate the assembly slowly about 90-degrees
and observe.
206.
Reposition the RoboArm back to 90-degrees
forward of the duckhead and finish the mounting.
207.
Use the RoboArm to push down on tire and
swing duckhead from rim position.