COATS RC150EX, RC200EX Tire Changer - Manual (Page 7)

Important: Always read and follow operating instructions. • 3
CAUTION
Replace any damaged or missing safety
decals. They are available from COATS, (800)
688-6359.
A Vertical Slide Locking Handle — Locks and unlocks
vertical slide and sets correct vertical position to
maintain head/wheel clearance.
B Swing Arm Adjustment Knob — Adjusts swing
arm/vertical slide assembly for proper horizontal posi-
tioning of duckhead ® .
C Release Valve — Allows the manual release of air
pressure from tire when clip-on chuck is attached to
tire valve.
D Air Inflation Gauge — Registers tire pressure when
clip-on chuck is attached to tire valve stem and infla-
tion pedal is released.
E Tower — Support for horizontal swing arm, also air
storage tank.
F Oil Check Dipstick — For transmission oil level.
G Inflation Pedal — Three-position pedal that allows
inflation of tires through air hose and clip-on chuck.
H Clamp Control Pedal — Three-position pedal that
opens and closes rim clamps.
J Bead Loosener Control Pedal — Controls operation
of bead loosener shoe.
K Tabletop Rotation Pedal — Three-position pedal
that controls rotation of tabletop.
L Tabletop — Rotating chuck for tire changing.
M Three Position Motorcycle Clamps — Holds wheel
to tabletop for tire changing.
N Pressure Safety Valve — The high pressure safety
valve is set to exhaust at line pressures above 185
PSI.
O Robotic Arm Control Valve — Controls Vertical
Movement of Robotic Arm Cylinder. (RC200 Only)
P Bead Sealing Nozzles (In Slides) — Expands tire
sidewall to bead seat area of rim to seal tire to rim
and allow inflation. (RC200 Only)
R Lube Bottle — Dispenser for rubber lubricant.
S Bead Lifting Tool — Used to lift and position tire
bead correctly on duckhead ® .
T Adjustable Bead Loosener Shoe — Pivoting shoe
for loosening tire beads.
U Bead Roller Tool — Used to apply pressure against
sidewall of tire.
X Motorcycle DuckHead ® — Mounts and demounts
tire from wheel.