Comark C9501/IS - Manual (Page 7)

6
ON NO ACCOUNT SHOULD THE BATTERY COVER BE
OPENED WITHIN THE HAZARDOUS AREA.
(A low battery voltage is indicated by the ‘BAT’ symbol
appearing on the display).
WARNING
INPUT HOSES SHOULD NOT BE DISCONNECTED FROM
THE INSTRUMENT WHILST CONTAINING GASES WHICH ARE
DANGEROUS AND/OR UNDER PRESSURE.
Do not apply pressures beyond the over range maximum for the
instrument or damage may occur.
DO NOT USE ANY OTHER MEANS OF POWER SUPPLY TO THE
INSTRUMENT OTHER THAN THE BATTERY TYPES AS LISTED ON
THE INSTRUMENT LABEL.
refer to section 3 — connection to pressure sources before operating
the instrument.
This instrument is manufactured in accordance
with the Company’s ISO 9001 Quality Approved
System.
This instrument complies with the
Electromagnetic Compatibility Directive
EN 61326-1.
Declarations of Conformity available. Contact
Comark Customer Support or your local
Distributor.
In line with its policy of continuous development, Comark Instruments
reserves the right to alter the instrument specifi cation without prior
notice. Further information is available from Comark Instruments or your
distributor.
ISO 9001
FM 26700