Replacing fork thumbscrew – Condux CableGlider LW Cable Puller User Manual
Page 18
Advertising
18
Replacing Fork Thumbscrew:
1. Remove thumbscrew with a tap and hammer. (See Figure 7)
2. Insert new thumbscrew (See Figure 8)
3. Place lockwasher on thumbscrew (See Figure 9), use a 5/16” socket to push lockwasher
onto the thumbscrew (See Figure 10). Thumbscrew needs to be pushed till it is resting on
the inside lip of the fork.
Replacement Part Numbers
Figure 7
Figure 8
Figure 9
Figure 10
Qty
Part No.
Description
Required
02289412
Thumbscrew
1
02289439
Push Nut
1
Advertising