CounterPath Bria 3.0 Administrator Guide - Manual (Page 15)

Bria 3.0 Administrator Guide
11
Procedure
1. From the Bria menu, choose Softphone > Account Settings. The SIP Account window appears.
2. Enter the User Details and then change or complete all other fields. See “Account Configuration
Reference” on page 15 for details.
3. When done with the SIP account, click OK; the account is created and registered.
4. If you are setting up an XMPP account, choose Softphone > Account Settings again. This time the Account
Settings window appears, showing the SIP account you have already set up.
5. Click Add > New XMPP Account. The XMPP Account window appears. Complete the window (page 17)
and click OK.
6. On the Account Settings window, click Apply to register the newly added account. Click OK when the
Status column is “Ready”.
Setting the IM/Presence Account
Presence subscriptions (for online status sharing) and instant messages can be handled through only one
account.
• If you have an XMPP account, presence subscriptions and instant messages are handled through that
account.
• If you do not have an XMPP account and you have more than one SIP account, you must select which SIP
account to use.
• If you are deploying manually, instruct all users on which SIP account to use. All users must use the
same account and they must not change the account without your instructions. When users set up
presence on the appropriate account, that account will show on the Accounts be selected
• If you will later be provisioning Bria, you will be able to set this account through provisioning.