Brada Appliances YPM-06C - Manual (Page 12)

- 12-
The water tank in the unit will fill when the air conditioner is used in the dehumidifying mode or run in an
area with high humidity.
When water tank is full, water full indicator will light and display will show P2 as alarm, the air conditioner
will be shut off automatically. Then you need to drain the water and restart the air conditioner as follows:
1. Unplug the unit.
2. Put a vessel such as water tank under the drainage port.
3. Remove the drainage cap and water stopper.
4. Drain out the water fully.
5. Insert the water stopper and screw down the drainage cap.
6. Plug in and restart the air conditioner.
Drainage port
Water stopper
Drainage cap
Cautions:
Move the air conditioner carefully when the water tank is full to prevent spillage.
The water tank capacity in air conditioner is 0.7L.
WATER DRAINAGE