CounterPath Bria 3.1 for Mac User Guide - Retail Deployments User Manual
Page 52
CounterPath Corporation
48
Accounts List with Multiple Accounts
You can:
•
Add or remove an account. (You can only add one XMPP account; you can add multiple SIP accounts.)
•
Enable one or more accounts. See below for details.
•
Set or change account properties. Select the account and click Edit. See the following pages for details.
Setting up Accounts for Phone Calls
If you have more than one SIP account, set up for phone calls as follows:
1.
Set up the “use for” information: Open the Accounts tab for each SIP account and check the Use For Call
field if you want to use the account for phone calls.
2.
Back on the accounts list, enable the accounts you currently want to use for phone calls. The following
rules apply:
•
When multiple accounts are enabled, you will be able to receive calls on all those accounts.
•
You can never place a call on a disabled account. If you place a call that is only valid on the disabled
account, it will fail with a “Not found” message.
•
You can never receive a call on a disabled account. If another party phones you on a number that is only
known to a disabled account, the call will never appear on your Bria.
Typically, set up accounts as instructed by your
VoIP service provider and enable them all
The functions this account is being
used for. See below.
This account will be used for calls if Auto Select is used
(page 13) and there are no dial plan rules for selecting
the account
Green means enabled and registered;
gray means not registered.