Before using for the first time, Using for the first time, Selecting the language – Bosch Lavadora Next Premium User Manual

Page 15: Setting the time, First washing cycle (without laundry)

Advertising
background image

15

Before Using

For the First

Time

The washing machine must be

installed and connected properly

(refer to Page 7).
Before using your washing machine

for the first time:
q Make sure that the supplied

voltage is the same as the voltĆ

age shown on the rating plate.

q Check that the water valves for

the washing machine have

been connected correctly and

are open.

Using For the

First Time

Selecting the language

i

The program selector must not

be set to Off.

i

The language must be selected

before a program is started.

q Simultaneously press the Menu

and Select buttons and hold

down (5 seconds) until the

current setting is displayed.

q Press the Select button until

the desired language is

displayed.

q Confirm the language selection

by pressing the Menu button.

i

The language selection can be

confirmed either by pressing

the Menu button or by leaving

the selected language for five

seconds.

i

The selected setting is retained

after the wash cycle.

Setting the time

i

To define the individual settings

(especially Program finished

at"), it is necessary to set

the time first; see Page 27.

First washing cycle

(without laundry)

Your appliance was tested before

leaving the factory. To remove

residues from production and

testing procedures, the first

washing cycle should be carried out

without laundry in the machine.
q Do not load any laundry.
q Turn on the water tap.
q Open the flap of the detergent

dispenser.

q Pour approx. 1 quart (1 liter) of

water into the detergent

chamber I; see Page 18.

q Fill a regular measuring cup

halfway full of detergent and

pour into detergent chamber I.

i

Do not use special detergents

for delicates or wool (this will

cause excessive sudsing).

q Close the flap of the detergent

dispenser.

q Close the door.
q Set the program selector to

Regular/Cotton temp. boost.

The Start/Pause indicator light

flashes (red).

q Press the Start/Pause button.

The program starts.

The indicator light is on (red).

i

The individual program steps

are indicated in the display field.

When Remove laundry" is

displayed:
q Open the door.
q Turn the program selector to

Off.

Advertising