DATOptic Dual Internal FireWire Kit - Manual

DatOptic Dual Internal FireWire Kit Manual
Congratulations on purchasing a DatOptic Internal FireWire Kit. This internal kit
will drastically lower your CPU usage by converting the ATA/ATAPI device to
FireWire IEEE1394. Similar to SCSI, the FireWire IEEE1394 has its own Bus so
there is very minimal CPU usage. You will notice that your computer will operate
more efficiently when the device is used as a FireWire drive instead of an
ATA/ATAPI drive.
Please follow the step by step instructions for quick installation of the DatOpic FireWire Kit.
Inspect the package and make sure you have the following parts:
DUAL FIREWIRE INTERNAL KIT SLAVE IDE RIBBON CABLE POWER CABLE
FIREWIRE CABLE
OPTIONAL
PCI HOST ADAPTER
OPTIONAL