Despatch Protocol Manager with Protocol Plus - Manual (Page 35)

Protocol Manager Software E-100
31
The Profile Datalog and Lot Datalog screens are accessed from the tabs at the right
side of the initial Recipe Editor screen, off the Recipe/Datalog Window. See Figure
27 and Figure 28.
Figure 27: Profile Datalog Window
Select the parameters to be written to the datalog by checking the boxes on the Profile
Datalog Window screen.
Log File Header Information
Check the following boxes to select the types of data to be written into the log file
header:
Controller Name
Start Date and Time
Operator ID
Lot Information