Despatch 1500 Controller - Manual (Page 15)

Despatch/Watlow 1500 Control Instruction Manual Page 9
Setting the Clock
1. Press the MODE key to select the Change Parameter
(CHG PARA) mode. The TIME LED will be ON. The
FUNCTION and DATA displays will show the real time
of day.
2. Press FCTN to produce the time prompt, HR, in the
FUNCTION display.
3. Enter the real time of day, beginning with hours. The
CHG PARA programming prompts are listed below in
the order they appear.
a. Enter the real time of day (24 hour basis) by
selecting the hour with the > key and the ? key.
b. Press ENTER to enter the hour into the program.
The prompt MN will appear when you press ENTER.
c. Select correct minutes and seconds.
After setting the real time the FUNCTION prompt should
display a GA. This is guarded access.