Despatch 1500 Controller - Manual (Page 36)

Page 30 Despatch/Watlow 1500 Control Instruction Manual
Procedure for Programming HAST Profile (Cont.)
23. At Step 48 the display will read 48 SP, press FCTN until
WT appears, press enter.
Press FCTN until W4 is displayed, use arrow keys to
0102, press enter
Press FCTN until NX is displayed, use arrow keys to
0049, press enter
24. At Step 49 the display will read 49 SP, press enter.
S1 is displayed, use arrow keys to 00, press enter
S2 is displayed, use arrow keys to 00, press enter
E1 is displayed, use arrow keys to 0010, press enter
E2 is displayed, use arrow keys to 1000, press enter
HR is displayed, press FCTN
MN is displayed, press FCTN
SC is displayed, use arrow keys to 01, press enter
TIME is displayed
NX is displayed, use arrow keys to 0050, press enter
25. At Step 50 the display will read 50 SP, press FCTN until
WT appears, press enter.
Press FCTN until W1 is displayed, use arrow keys to
40, press enter
Press FCTN until NX is displayed, use arrow keys to
51, press enter
26. At Step 51 the display will read 51 SP, press enter.
S1 is displayed, use arrow keys to 00, press enter
S2 is displayed, use arrow keys to 00, press enter
E1 is displayed, use arrow keys to 0000, press enter
E2 is displayed, use arrow keys to 0000, press enter
HR is displayed, press FCTN
MN is displayed, press FCTN
SC is displayed, use arrow keys to 05, press enter
TIME is displayed
NX is displayed, use arrow keys to 0001, press enter
27. Press mode key to jump out of guarded access.