Det-Tronics ATX10 Transmitter SAFETY MANUAL User Manual

Safety manual flexsonic

Advertising
background image

SAFETY MANUAL

FlexSonic

Acoustic Detector

AC100 Sensor

ATX10 Transmitter

1.2

©

Detector Electronics Corporation 2013

Rev: 6/13

95-8658

SAFETY CERTIFIED FLExSoNIC ACoUSTIC
DETECToR
This manual addresses the specific requirements

and recommendations applicable to the proper

installation, operation, and maintenance of all Safety-

Certified (SIL-Certified) FlexSonic

Acoustic Detector

product versions. For complete information regarding

system overview, performance, installation, operation,

maintenance and specifications of the FlexSonic

Acoustic Detector, refer to instruction manual 95-8657.

QUALITY PoLICY STATEMENT
All quality assurance control measures necessary for

safety management as specified in IEC 61508 Part 1

have been implemented. The quality management

system of Det-Tronics is based on the requirements

of EN ISO 9001 and ANSI/ASQC Q9001 through the

application of the United Technologies Company

Achieving Competitive Excellence (ACE) program. In

addition, the Quality Management System complies

with the European ATEX Directive, EN ISO/IEC 80079-

34, and supervised testing requirements per ISO 17025.

SAFETY MESSAGES
Procedures and instructions in this section may

require special precautions to ensure the safety of

personnel performing the operations. Information that

raises potential safety issues is indicated by the word

“Warning”. Always read and understand these safety

messages.

WARNING

The FlexSonic Acoustic Detector is intended for
use in hazardous environments that may include
explosive levels of flammable gases and vapors.
This product must be properly installed, operated
and maintained. Improper installation or use
could result in an explosion or fire resulting in
death or serious injury.
• Do not remove the cover of a junction box in

explosive environments when device power is
on and circuits are live.

• Device must be properly installed to meet

hazardous area explosion-proof/non-incendive
and intrinsic safety requirements.

AC100 Sensor

ATX10 Transmitter

Advertising
This manual is related to the following products: