Eberspacher EasyStart Timer Operating instructions - Manual (Page 22)

22 | VehiCLe heATeRs – TeChniCAL DOCuMenTATiOn
program memory p1 display, factory setting.
1
Mo. - Fr. 21 °C
07 : 00 30 min.
program memory p2 display with programmed
preselection.
2
Mi. 21 °C
06 : 30 60 min.
press the button to confirm the selected pro-
gram memory.
ACTiVATing / DeACTiVATing The pROgRAM MeMORy
use the or button to select the “On” or “Off”
setting.
2
Off On
2
Off On
Confirm the “On” or “Off” setting with the but-
ton, the program, e.g. p2 is activated or deactivated.
3 OpeRATiOn AnD seTTing/ADjusTMenT
prOgram prEsEt timEs
Display On, the start display appears.
use the or button to select the symbol in
the Menu bar.
Display, if no preselection is activated.
1 2 3
Display, if a preselection is activated e.g. p2.
1 2 3
Confirm the pROgRAM menu item by pressing the
button.
plEasE NOtE!
if the symbol is marked with , a or several pro-
gram memories is/are already activated.
Activated program memories are marked in the dis-
play with a .
Easystart timEr sEttiNgs
seLeCTing The pROgRAM MeMORy
The p1 program memory is displayed, if applicable,
use the
or button to select the next program
memory p2, p3 or p1 again.