Elkhart Brass SFL-GN-125 - Manual (Page 2)

Please refer to FIGURE 1 on page 7.
I. Operating Instructions
A. The nozzle is put into operation by first checking that
the Nozzle Tip is in the Wide Angle Fog position and
the Horshu-Handle is in the “CLOSED” position.
1. Rotate the Nozzle Tip by grasping the Hand
Grip and turning it counter clockwise until the
bottom of the Locking Lever is resting in the
notch directly below the Wide Angle Fog symbol
on the Nozzle Tip.
2. Push the Horshu-Handle as far forward as
possible to place it in the “CLOSED” position.
B. The nozzle-man should activate the water supply.
C. The nozzle-man (with hose team) should then
advance the nozzle toward the fire, but short of
engagement.
WARNING: The nozzle and hose line should be fully
manned (at least 2 men) before engaging the fire.
2