Elkhart Brass Scorpion 8394-04 BRASS - Manual (Page 6)

e. For p/n 81480021 the monitor will rotate to the right travel limit and stop.
f. Stow signal operation will depend on P19 jumper setting (see step 7).
NOTE: Regardless of the stow position setting or stow signal setting; once the monitor reaches the
stowed position the stow signal will be a constant 12VDC. The 12VDC signal will stay on until a
nozzle or monitor function (including stow) is activated. Removing power to the relay box will
interrupt the stow signal but when power is restored to the relay box the 12VDC stow signal will
come back on.
Caution:
Use of the manual override(s) to move the monitor out of its stowed position
will result in a false stow indication. Activating the stow feature and allowing the monitor to go
through the stow routine can reestablish the true stowed position and indication.
10. TO STOP THE STOW ROUTINE:
a. Momentary activation of ANY nozzle or monitor function (including stow) at
ANY time during the stow routine will abort the stow command and the monitor
will stop. Once the stow routine has been stopped the monitor is ready for normal
operation.
5