Elkhart Brass Sidewinder RF 8494 - Manual (Page 11)

Page 8
III. C
ONTROL
S
YSTEM
S
PECIFICATIONS
Handheld Transmitter Specifications
• Input power 2 AA batteries (Alkaline recommended)
• Output power Meets FCC part 15 requirements for license free
operation
• Transmitter dimensions 6” x 3 1/4” x 1 3/8”
• Transmitter weight 10 ½ oz.
• Operating temperature range -40 °F to 150°F (-40°C to 65°C)
• FCC ID QT8PTSS2011
Joystick Transmitter Specifications
• Input power 12/24 VDC (11VDC to 30 VDC)
• Output power Meets FCC part 15 requirements for license free
operation
• Transmitter dimensions Joystick: 4 3/4” x 4 11/16” x 10 5/8”
• Operating temperature range -40 °F to 150°F (-40°C to 65°C)
• FCC ID QT8PTSS2011
RF Receiver/Control Module Specifications
• Power requirements 12VDC (11-30VDC) at the controller under full load
• RF Receiver/Control Module dimensions
• Control current
16 1/4” x 10 1/2” x 3 3/16”
0.15 A
*
• Operating temperature range -40 °F to 176°F (-40°C to 80°C)
Table 1
Motor Current Specifications
Monitor Left/Right Up/Down Nozzle
Run I 2 A 2 A 0.5 A
Stall I 12 A 14 A NA
Current Trip Point 9.2 A 8 A 4 A
Shock:
• 30 G's (55 Hz. @ .2 inch double amplitude)
Vibration:
• 15.5 G's (55 Hz. @ .05 inch double amplitude) continuous operation
Drop Test:
• Both the transmitter and RF receiver/control module must meet operating specifications after drop from
1-meter height onto concrete surface.
Environmental:
• NEMA 4 rating (except 81498001 Joystick Assembly) (must withstand a 1 inch stream of water (65
gpm) from a distance of ten feet for five minutes, with no water entering the enclosure).
*
All current ratings are at 12 volts