Elkhart Brass Sidewinder RF 8494 - Manual (Page 7)

Page 4
Figure 2
81496001 RF Receiver/Control Module
Caution:
Any modification of the enclosure will destroy the NEMA 4 rating, and will void the warranty
coverage of the RF Receiver/Control Module.
The following additional functions/features are provided in the RF receiver/control module:
Reverse Polarity Protection:
If battery connections are reversed, this feature
prevents power from being applied to circuits, and prevents damage to
electronic components.
Circuit Board Moisture Protection:
In addition to being protected within a
NEMA 4 sealed enclosure, the circuit board and circuit components are
protected from moisture by an acrylic resin conformal coating.
C. RF Transmitters
The 8494 RF monitor uses W.E.T. (Wireless Electronic Technology), an innovative wireless
radio link, to send all commands from the RF transmitters to the RF Receiver/Control
Module. The new W.E.T. wireless link gives the operator the ability to view the discharge
stream and target from virtually any point of view. The 8494-RF monitor comes standard
with a joystick or a twin joystick transmitter. An optional handheld transmitter can be
purchased from Elkhart Brass and can be programmed to work with any W.E.T. enabled
monitor.