Elkhart Brass Sidewinder 8494 - Manual

98184025 (Rev-REL)
REPLACEMENT PART NUMBER GUIDE FOR USE WITH
8494 SIDEWINDER TROUBLESHOOTING GUIDE P/N 98184020
Refer to the following 8494 Electric monitor system layout drawings.
P/N 8494010 for the 12v system and 8494510 for the 24v system.
STEPS 1a & 2a VERTICAL AND HORIZONTAL POSITION SENSOR REPLACEMENT
The same position sensors are used on the 12v and 24v systems. Identify the sensor
needing replaced and see parts required below.
P/N 81113001 P/N 81280001 P/N 65104000
 P/N 81113001 (used Pre 2004) can be identified by the metal housing and the
threaded connection for the harness attachment. The attached harness leads
are yellow in color. These sensors are no longer available so both sensors and
the monitor harness must be replaced with the following parts.
o P/N 81280001 (sensors) – 2 Req’d.
o P/N 57519000 (sensor o-rings) – 2 Req’d.
o P/N 36833100 (monitor harness part 1) – 1 Req’d.
o P/N 36791200 (monitor harness part 2) – 1 Req’d.
 .P/N 81280001 (used from 2004 – 2007) can be identified by the metal housing
with a football shaped mounting flange. It has a 6” long lead with a grey 3 pin
Deutsch connector for attachment to the monitor harness.
o Replace with P/N 81280001
 P/N 65104000 (used since 2007) can be identified by the plastic housing with an
oval shaped mounting flange. It has a 6” long lead with a grey 3 pin Deutsch
connector for attachment to the monitor harness.
o Replace with P/N 65104000