Elkhart Brass Sidewinder 8494 User Manual
Page 2
Elkhart Brass Mfg. Co., Inc. 1302 W. Beardsley Avenue • Elkhart, Indiana 46514 • 1-574-295-8330 • 1-800-346-0250
www.elkhartbrass.com
STEP 1c & 2c MONITOR MOTOR REPAIR OR REPLACEMENT
Identify the voltage and speed for the motor assembly that needs repaired or replaced
by pilling the motor cover back to expose the motors label. Look for the motors voltage
(12v or 24v). Look for the motor speed 65.5:1 is SLOW, 19.7:1 is FAST. Once these
Two things have been determined choose the desired part number from the list below.
For replacing the motor only order 2 each of o-ring p/n 57348000. These two o-
rings are to be coated with grease and put onto the motors output shaft before
attaching it to the mounting plate. The motor only part numbers are;
o
46043000 – Slow 12v
o
46067000 – Slow 24v
o
46062000 – Fast 12v
o
46074000 – Fast 24v
For replacing the motor assemblies painted RED the part numbers are;
o
81119SP1 – Slow 12v
o
81207SP1 – Slow 24v
o
81147SP1 – Fast 12v
o
81240SP1 – Fast 24v
For unpainted motor assemblies change the last 3 digits of the part number to
001.
STEP 3 NOZZLE REPAIR OR REPLACEMENT
Identify model of nozzle. The 5000E series nozzles will have the flow rating
stamped on the stem of the nozzle.
o
Model 5000-04E will have the number 15, 30, or 45 stamped on its stem
to indicate its flow rating at 100 psi.
o
Model 5000-14E will have the number 60, 75, 95, 125, or 150 stamped on
its stem to indicate its flow rating at 100 psi.
o
Model 5000-24E will have the number 175, 200, 250, 300, 350,400, or 475
stamped on its stem to indicate its flow rating at 100 psi.
Identify the nozzles operating voltage (it will be 12v or 24v and will be the same
as the monitor system operating voltage). The nozzles electric actuator will have
a label with the 8 digit part number for the actuator and if it is a;
o
12vdc actuator it will have only the 8 digit part number or the part number
and 12vdc below the part number.
o
24vdc actuator it will have the 8 digit part number 24vdc below the part
number.