Elkhart Brass SPIT-FIRE 8394053 Monitor - Manual (Page 8)

8
III SPECIFICATIONS
General Specs
 Input Power 120/240 VAC (50/60Hz.)
440/480 VAC (50/60 Hz.)
500 VA max. Power
 Electrical Load 5 AMPS MAX at 120/240 VAC
1 AMP MAX at 440/480 VAC
 Fused Output Power 24 VDC – 5 AMPS MAX
120 VAC – 3 AMPS MAX
 Panel Dimensions 24” X 30” (610 mm x 762 mm)
 Panel Weight Approx. 100 lbs (45 kg)
 Operating Temperature Range +14 o F to +158 o F (-10 o C to +70 o C)
UL and ATEX Product Marking (if ordered)
 UL Inspected and Labeled (Class 1, Division 2)
 CE ATEX certification available upon advanced request
IV OPERATING INSTRUCTIONS
This control panel has one ON/OFF 2-position selector switch. Move it to the ON position so the pilot light
illuminates, showing the panel is now powered up, and ready for associated monitor operation.
V MAINTENANCE
Monthly Inspection and Maintenance
1. Check the indicator light and replace bulb if it’s not operable.
2. Confirm that all terminal blocks and connections are properly taut to 4.5 – 7.1 in-lbs. (0.508 – 0.802
Nm).
3. Check for proper operation of the system overall, if there are problems with the system please refer to
the Troubleshooting section for help.