Warning – Elkhart Brass X-Stream SM1000BE – SM2000BE HL/HLGM User Manual
Page 5
5
II OVERVIEW
The Select-O-Matic nozzle is the most efficient and effective master stream combination nozzle available to
the fire service today. It is designed to flow and maintain sufficient pressure to apply that flow as an effective
fire stream. No manual gallonage setting is necessary; the spring mechanism within the nozzle adjusts
automatically to provide the desired flow. This nozzle is ideal for any master stream application: ladder pipe,
deck gun, portable monitor, elevated platform, etc.
Select-O-Matic industrial nozzles are constructed from rugged, heavy-duty brass. The enclosed stainless steel
spring mechanism adjusts automatically to flow fluctuations and sets the discharge orifice size accordingly.
The design of the nozzle assures you of efficient fire streams from straight stream through wide fog.
Electric X-Stream® Nozzle Features:
Inlet – 3.5” N.H. Threaded female swivel
Construction – All brass and stainless steel
Stream Adjustment – Electric with manual override adjusts from straight stream to wide fog (Knob
does not move when actuated electrically)
Flow – SM-1000 – Flow: 300GPM @ 60psi – 1000GPM @ 82psi (3785 LPM @ 5.7 BAR)
SM-1250 – Flow: 388GPM @ 50psi – 1250GPM @ 75psi (4731 LPM @ 5 BAR)
SM-2000 – Flow: 300GPM @ 38psi – 2000GPM @ 82psi (7570 LPM @ 5 BAR)
(See Nozzle flow graphs on page 7 and check catalog for current specifications)
Motors – 120 VAC NEMA 4 (IP-67) rated synchronous motors (non-arcing)
o
Constant torque and current output in start, running, and stall
o
II 3 G c (Ex nA II T4)
o
Will not cause damage or increase in current when motor is stalled
o
Instantaneous start, stop, and reverse
o
Residual (Power Off) torque is always present
o
Long life and exceptional reliability
Pattern Adjustment Range – Nozzle stops are factory set at 100° (0° to 100°)
Rate of Motion – 0.0428 Sec/°
Manual Override – Hand wheels provided for straight stream and fog stream movements. Hand wheel
will not rotate when nozzle is operated electrically.
CE ATEX 94/9/EC Certification (Group II, Category 3)
WARNING:
Do not take cover off or disassemble Nozzle Motor. If cover is/has been
removed, the warranty is void and the service life of the motor is significantly reduced.