Installation instructions, Ii. i, Nstallation – Elkhart Brass ELKHART 253-9 Foam Tubes User Manual
Page 6: Nstructions
Advertising
- 2 -
II. I
NSTALLATION
I
NSTRUCTIONS
1. 251-6 Foam Tube
To attach the foam tube to the nozzle first lift up on the lever handle to open the jaw
clamp (see
), then carefully tilt the nozzle bumper into the half round portion of
foam tube base clearing the jaw clamp. Next press down firmly on the lever handle to
fully clamp nozzle into place (see
Figure 1
Figure 2
Advertising
This manual is related to the following products: