BT verve 450 User Manual
Page 10
Date and time
Providing you have subscribed to your
network’s Caller Display service, the
date and time is set automatically for
all handsets when you receive your
first call.
The date and time is recorded with
each answering machine message you
receive.
If you do not have a Caller Display
service you can set the date and time
manually.
Any additional handsets supplied as part of a multipack are
pre-registered to the base so, once charged, are ready for use.
The handset number is shown in the display.
Set date and time manually
1. Press
Menu
and scroll
to
Settings
and press
OK
.
2. Scroll
to
Clock/Time/Alarm
then press
OK
.
3.
Date
/
Time
is highlighted. Press
OK
.
4. The current Time format is highlighted. Scroll
or
to choose
24 hour
or
12 hour
.
5. Scroll
to
Date format
and scroll
or
to choose
dd/mm
or
mm/dd
.
6. Scroll
to
Enter time
and enter the time
e.g. 1705 for 5 05 pm.
7. Scroll
to
Enter date
and enter the date, e.g. 09 06 07
for 9th June 2007.
8. Press
OK
to save.
9. Press
Back
until you return to standby.
Your BT Verve 450 is ready for use.
10
Getting started
If you experience any problems, please call the Helpline on 0800 218 2182* or email [email protected]