Elkhart Brass 2900E Series User Manual
Page 4
3
I. PRODUCT SAFETY:
It is critical to the safety of installers, users and bystanders that the following precautions
are followed:
1. Keep fingers and hands clear of the valve waterway whenever power is
connected to the valve.
2. Be certain that the valve motor power is disconnected prior to servicing the
valve.
Motor power can be disconnected by pulling apart the small, two-
conductor automotive type wire connector near the valve motor.
3. Whenever valves are installed near hose connections, such that fingers or
hands could reach the valve ball or disc, a screen or strainer must be installed in
the waterway between the hose connection and the valve.
An adhesive backed warning label, which is supplied with each valve
(25024000), should be applied to the pump panel or apparatus body
adjacent to the hose connection controlled by an electrically operated
valve.
4. A warning label is applied to each valve motor. This label includes a peel-off
paint mask. It is important that this mask be removed prior to the apparatus being
placed into service.