ElmoMC AC Input Digital Servo Drives-Cornet - Manual (Page 8)

Harmonica and Bassoon Cable Kits
MAN-CBLKIT- (Ver. 3.4)
3-1
3. Main Feedback Cable
The main feedback cables are made from 24 AWG shielded twisted pair (STP) cable. There are
three types of feedback cables. All three cables use a 12-pin Molex 2.0 mm pitch plug on the
SimplIQ side.
ƒ The General Purpose Main Feedback Cable (CBL-MLXFDBK) is open on the motor side so
that it can be connected to customer-specific connectors.
ƒ The Encoder Cable (CBL-MTRENC1) has a 15-pole socket on the motor side for Metronix
APM-SAR, SA, SB and SC motors.
ƒ The Encoder Cable (CBL-MTRENC3) has a 17-pole Amphenol socket on the motor side for
Metronix APM-SE motors.
3.1 General Purpose Main Feedback Cable
(CBL-MLXFDBK- 5 )
Molex
Pin No.
Color
Twisted &
Shielded Wire
Description
1 Green pair see Installation Guide
2 Yellow
3 Pink see Installation Guide
4 Drain Wire see Installation Guide
5 White pair see Installation Guide
6 Brown
7 Blue pair see Installation Guide
8 Red
9 Black pair see Installation Guide
10 Purple
11 Orange pair see Installation Guide
12 Cyan
Drain Wire
Table 3-1: Main Feedback Cable for the Harmonica and Bassoon Drives
The specific functionality of each pin is fully outlined in the Harmonica and Bassoon
Installation Guides.
Figure 1: Single-sided Main Feedback Cable (Part No. CBL-MLXFDBK- 5 )