ElmoMC SimplIQ Analog Servo Amplifiers-Ocarina Installation - Manual (Page 26)

Ocarina/Castanet Installation Guide Servo Control Operation
Notes:
ƒ Without latch mode:
The status indications are reset when the fault disappears.
ƒ With latch mode:
The Short, Over Temperature and Commutation Failure status indications are reset
when the enable signal is temporarily removed from the enable input.
ƒ Multiple faults:
Only the reading of the first fault is reliable. Additional faults add on to the status
outputs and the indication is therefore meaningless.
4-4
MAN-OCSIG (Ver. 1.4)