ElmoMC SimplIQ Analog Servo Amplifiers-Ocarina Evaluation Board User Guide - Manual (Page 5)

Ocarina Evaluation Board User Guide
MAN-EVLBRD-OCA (Ver. 2.1)
Chapter 1: Safety Information
In order to achieve the optimum, safe operation of the Ocarina Evaluation Board, it is
imperative that you implement the safety procedures included in this installation guide.
This information is provided to protect you and to keep your work area safe when
operating the Ocarina Evaluation Board and accompanying equipment.
Please read this chapter carefully before you begin the installation process.
Before you start, ensure that all system components are connected to earth ground.
Electrical safety is provided through a low-resistance earth connection.
Only qualified personnel may install, adjust, maintain and repair the servo drive. A
“qualified person” has the knowledge and authorization to perform tasks such as
transporting, assembling, installing, commissioning and operating motors.
The Ocarina Evaluation Board contains electrostatic-sensitive components that can be
damaged if handled incorrectly. To prevent any electrostatic damage, avoid contact with
highly insulating materials, such as plastic film and synthetic fabrics. Place the product
on a conductive surface and ground yourself in order to discharge any possible static
electricity build-up.
To avoid any potential hazards that may cause severe personal injury or damage to the
product during operation, keep all covers and cabinet doors shut.
The following safety symbols are used in this manual:
Warning:
This information is needed to avoid a safety hazard, which might cause
bodily injury.
Caution:
This information is necessary for preventing damage to the product or
to other equipment.
Note:
This is auxiliary information that ensures the correct operation of the
equipment.
1-1