Englert IMP Englert Combined - Manual (Page 3)

SUBJECT TO CHANGE WITHOUT NOTICE 2
P
ROFILES
 Infinity
 Stucco
 Impression
 MesaLine
 VeeLine
 WaveLine
 ShadowLine
I
NTRODUCTION
Insulated metal panels (IMPs) are premier building products on the leading edge of innovation. The
panels are formed by a continuously, foamed-in-place manufacturing process which binds interior and
exterior steel facings to a polyisocyanurate, insulating core. With exceptional R-values (R-8/inch),
superior spanning capability, accelerated installation times, cost-effective pricing, recycled content,
plus a rigid feel and streamlined architectural appearance the applications are limitless.
The in-place performance of the aforementioned panels is critically dependent upon a quality
installation hence the creation of the following manual. This installation guide is intended for use in
conjunction with the construction drawings. If there is a conflict between this guide and the
construction drawings, the construction drawings shall take precedent.
A
CCOUNTABILITY
As with all construction projects, the contractor is ultimately responsible for the correct installation of
the insulated metal panels. A high degree of logic and good judgment is expected and the contractor
should be experienced. Most projects have their share of adjustments and changes and the contractor is
responsible for addressing field issues. If a particular detail is not expressly addressed in this manual,
the contractor should apply the principles illustrated herein to address the situation. An omission of
this manual in no way absolves the installer of his responsibility for a quality, functioning install. If the
contractor is presented with an insurmountable issue, he should immediately contact the manufacturer
for assistance.
C
ONDITIONS
The information in this guide is based on the application of standard wall panels on typical building
conditions. Required deviations are the responsibility of the installer. Englert does not guarantee and
cannot be held liable for the quality of installation. Englert is not responsible for defects attributed to
improper installation or the negligence of other parties. Englert makes no expressed or implied
warranties pertaining to the fitness of the insulated wall panels or its components and shall not be
responsible for any indirect or consequential damages, such as to building contents, nor for any further
loss of any kind to the owner or contractor.