Brunton MapCreate 6 - Manual (Page 61)

Create a waypoint: First, find the location on the Master Map. The longer ar-
row shows the location of a public hunting area parking lot.
Move the pointer arrow tip over the location (left) and click to create the way-
point. The waypoint appears (right) with the default waypoint symbol and
name, both of which can be changed. These figures were taken from a zoom
range of 4.05 miles. It looks as if the waypoint is on the road, but zooming in
closer would show the waypoint is actually south of the road, just where the
pointer tip placed it.
5. Relocate your mouse pointer and click to create additional waypoints as
needed.
6. To close the Create Waypoints command, press Esc (the Escape key)
or click the C ENTER M AP
or Z OOM A REA
buttons.
Tips:
• If you need to erase or delete a waypoint, move the cross-hair pointer
or the zoom area pointer over a waypoint and right-click. In the pop-up
menu, click
D
ELETE
W
AYPOINT
.
• If you want to reposition the waypoint, move the cross-hair pointer or
the zoom area pointer over a waypoint and right-click. In the pop-up
menu, click
M
OVE
W
AYPOINT
, and the pointer grabs the waypoint. Move it
to the new position and click to set it there.
55