ETC Selador Desire Series D06 XTI Half Shield User Manual

E t c, Selador desire, Series d40/d60 xti half shield

Advertising
background image

E T C

®

I n s t a l l a t i o n G u i d e

Selador Desire

®

Series D40/D60 XTI Half Shield

D40/D60 XTI Half Shield

Page 1 of 2

Electronic Theatre Controls, Inc.

Corporate Headquarters

3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA

Tel +608 831 4116

Fax +608 836 1736

London, UK

Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK

Tel +44 (0)20 8896 1000

Fax +44 (0)20 8896 2000

Rome, IT

Via Pieve Torina, 48, 00156 Rome, Italy

Tel +39 (06) 32 111 683

Fax +44 (0) 20 8752 8486

Holzkirchen, DE

Ohmstrasse 3, 83607 Holzkirchen, Germany

Tel +49 (80 24) 47 00-0

Fax +49 (80 24) 47 00-3 00

Hong Kong

Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong

Tel +852 2799 1220

Fax +852 2799 9325

Service: (Americas)

[email protected]

(UK)

[email protected]

(DE)

[email protected]

(Asia)

[email protected]

Web:

www.etcconnect.com

Copyright © 2014 ETC. All Rights Reserved.

Product information and specifications subject to change.

7410M2120

Rev B

Released 2014-02

ETC intends this document to be provided in its entirety.

The Half Shield is used to provide glare control at specific angles to either the D40XTI or the D60XTI
fixture.

Installation

The Half Shield can be mounted in four positions on the front of the trim ring of the DXTI fixture. It can
also be combined with the secondary lens kit. The Half Shield is installed with the four existing stainless
steel screws that secure the trim ring. Reference the Desire Series D40/D60 XTI Installation Guide and
the Desire Series D40/D60 XTI Secondary Lens Installation Guide for information on electrical
requirements and installing the fixture. ETC documentation is available for download at

www.etcconnect.com

.

W A R N I N G :

Do not use the fixture with a damaged power lead. If the power lead (cord set)

is damaged, it must be replaced.
Do not expose the interior of the fixture to moisture. Do not stand in water while

installing or servicing the fixture.
Failure to follow these warnings can result in serious injury or death.

C A U T I O N :

Do not use the fixture if glass lens in deeply scratched or cracked. Damaged lenses

must be replaced.
Do not mount the fixture on or near combustible surfaces.

Half shield

Advertising
This manual is related to the following products:
Table of contents