ETC Selador Desire Series D06 XTI Half Shield - Manual (Page 2)

E T C I n s t a l l a t i o n G u i d e
D40/D60 XTI Half Shield
D40/D60 XTI Half Shield Page 2 of 2 Electronic Theatre Controls, Inc.
To install the Half Shield:
Step 1: Using a #2 Phillips screwdriver remove the four trim ring screws.
Step 2: Face the shallow side of the shield toward the object you are lighting, positioning the
tallest side of the shield so it provides glare control away from the lighted object.
Step 3: Align the Half Shield with the four mounting holes on the trim ring.
Step 4: Secure the Half Shield with the four trim ring screws.
N o t e : The Half Shield is installed on top of the trim ring using the existing set of screws.
Screws and
washers (x4)
Half shield
Trim ring