ETC Source Four PARNel CE - Manual (Page 6)

4 Source FourPARNel CE User Manual
English
HPL lamp table
C A U T I O N : Do not use lamps other than the HPL in Source Four fixtures. Use of lamps other
than HPL will void your warranty.
Lamp code Watts Volts Initial Lumen Colour
temp.
Average rated life
HPL 750/230 750 230 19,750 3,200°K 300 hours
HPL 750/230X 750 230 15,600 3,050°K 1500 hours
HPL 575/230 575 230 14,900 3,200°K 400 hours
HPL 575/230X 575 230 11,780 3,050°K 1500 hours
HPL 375/230 375 230 7,250 3,000°K 1000 hours
HPL 750/2240 750 240 19,750 3,200°K 300 hours
HPL 750/240X 750 240 15,600 3,050°K 1500 hours
HPL 575/240 575 240 14,900 3,050°K 400 hours
HPL 575/240X 575 240 11,780 3,050°K 1500 hours
HPL 375/240X 375 240 19,750 3,000°K 1000 hours
N o t e : The performance of saturated colours may be less than desirable in any theatrical
lighting luminaire, especially when equipped with a 750w lamp. For best results,
always use high-quality colour media rated for high-temperature use.
ETC’s optional Gel Extender, part # PSF1029, will provide maximum colour media
life. The use of any gel extender accessory may limit the coverage of any wide-
angle lens or beam setting.
A variety of heat shield products is also available from many colour media
manufacturers. Follow the manufacturer’s instructions for the use of these
products.