ETC Source Four PAR CE - Manual (Page 6)

4 Source Four PAR CE User Manual
English
HPL lamp table
Colour frame holder
The colour frame holder is equipped with a spring-loaded retaining clip that prevents colour frames
and accessories from falling out. See Figure 2 .
Step 1: Release the retaining clip by pushing it sideways while gently pulling backwards.
Step 2: Insert the colour frame.
Step 3: Lock the retaining clip by pushing sideways while gently pushing forward.
W A R N I N G : Do not use lamps other than the HPL in Source Four PAR CE luminaries. Use
of lamps other than HPL will void your warranty.
Lamp code Watts Volts Initial Lumen Colour
temp.
Average rated life
HPL 750/230 750 230 19,750 3,200°K 300 hours
HPL 750/230X 750 230 15,600 3,050°K 1500 hours
HPL 575/230 575 230 14,900 3,200°K 400 hours
HPL 575/230X 575 230 11,780 3,050°K 1500 hours
HPL 375/230 375 230 7,250 3,000°K 1000 hours
HPL 750/2240 750 240 19,750 3,200°K 300 hours
HPL 750/240X 750 240 15,600 3,050°K 1500 hours
HPL 575/240 575 240 14,900 3,050°K 400 hours
HPL 575/240X 575 240 11,780 3,050°K 1500 hours
HPL 375/240X 375 240 19,750 3,000°K 1000 hours
W A R N I N G : Make sure all colour frame accessories are locked in position with the
retaining clip before hanging the Source Four PAR CE.
N o t e : The performance of saturated colours may be less than desirable in any theatrical
lighting luminaire, especially when equipped with a 750w lamp. For best results,
always use high-quality colour media rated for high-temperature use.
ETC’s Conical Gel Extender, part # PSF1029, will provide maximum colour media
life. The use of any gel extender accessory may limit the coverage of any wide-
angle lens or beam setting.
A variety of heat shield products is also available from many colour media
manufacturers. Follow the manufacturer’s instructions for the use of these
products.
Figure 2
Retaining clip in the
locked position