Burley BEE - Manual (Page 9)

9
Burley Bee Owner’s Instruction and Safety Manual
IMPORTANT: Always fasten and adjust the two buckles behind
the child seat when using the trailer.
Single Passenger:
1. Unclip the center support strap (with O-ring).
2. Unclip all of the shoulder straps from the Y-buckles. Leave outboard
shoulder straps dangling.
3. Remove the two center shoulder straps by unthreading them from the
ladder locks.
4. Trade the positions of the shoulder straps and re-insert the straps into the
ladder locks as shown in the illustration. The fl at parts of the male portion
of the Y-buckle should face toward the center.
5. Seat the child in the center of the seat.
6. Snap in the shoulder straps at the Y-buckle. Ensure that the Y-buckle is
adjusted so that it is at the child’s sternum.
7. Ensure that the shoulder straps are adjusted so that the child is comfortably
kept from moving too far forward in the seat.
8. Fasten and adjust the lap belt so that it is snug.
Ladder Lock