Best Data Products DSL502E_EU - Manual (Page 54)

Best Data DSL542 ADSL Ethernet Router User’s Guide
46
Modifying ATM VCCs
Your device may already be preconfigured with the necessary ATM VCC properties, or the table
may contain placeholder values that you must change before using the device. Contact your ISP
to determine your ATM VCC values. Follow these instructions to modify a preconfigured VCC:
1. From the ATM VCC Configuration page, click in the Actions column for the interface
you want to modify.
The ATM VCC Interface – Modify page displays, as shown in Figure 36.
Figure 35. ATM VCC Interface – Modify Page
2. Enter the new VPI and VCI values, select the MUX type, or change the maximum number
of protocols that the VCC can carry, as directed by your ISP.
You cannot modify the interface type over which an existing VCC operates (aal5-0, for
example). If you want to change the interface type, you must delete the existing interface,
create a new one, and select the desired interface type.
3. Click .
4. On the confirmation page, click to return to the ATM VCC Configuration page.
5. Click the Admin tab, and then click Commit & Reboot in the task bar.
6. Click to save your changes to permanent memory.
7. You can verify that the new settings work by attempting to access the Internet from a
LAN/USB computer. Contact your ISP for troubleshooting assistance.