Britax ROUNDABOUT 55 - Manual (Page 42)

40
1 Loosen the harness.
a Lift harness adjuster lever
b Pull both harness straps forward
2 Remove the body pillow, unbuckle
the harness, and remove the belly
pad.
3 Lift the back cover, then pull it
forward while pulling the buckle
through to access the rear-facing
belt path.
4 Route the vehicle seat belt
through the rear-facing belt slots,
then buckle. Ensure the vehicle
belt is not twisted.
5 Push the child seat down while
pulling the vehicle belt to remove
all slack (see pages 10 – 11).
6 Rear-facing installations can be
improved by the use of the Versa-
Tether (see pages 26 – 29).
7 Pull the buckle up through its
appropriate slot in the cover.
8 Replace the cover and belly pad.
1b
1a
4
5
Rear-Facing Installation