Britax ROUNDABOUT 55 - Manual (Page 54)

52
1 Loosen the harness.
a Lift harness adjuster lever
b Pull both harness straps forward
2 Remove the body pillow and
unbuckle the harness.
3 Lift the back cover, then pull it
forward to access the forward-
facing belt path.
5 Push the child seat down while
pulling the vehicle belt to remove
all slack (see pages 10 – 11).
6 Attach and remove slack from the
Versa-Tether (if an anchor point is
available).
7 Store excess webbing in the
elastic strap.
8 Replace the cover.
4 Route the vehicle seat belt
through the forward-facing belt
slots, then buckle. Ensure the
vehicle belt is not twisted.
Forward-Facing Installation
1b
1a
4
5