Hahnel Inspire LiveView - Manual (Page 6)

Receiver
Power ON/OFF Switch
Mini USB 5V power input
Inspire Camera Lens
Synchronise Button
LED Indicators
AV Cable Socket
Remote Control Cable Socket
Remote Control Cable
Pouch for AV Cable
Transmitter
Power ON/OFF Switch
LED Indicator
Autofocus/Shutter Release
Right Arrow (forward)
Select Button/
Sleep Mode Options
Left Arrow (backwards)
Inspire View / DSLR LiveView/
Playback Menu (Press & Hold)
Synchronise Button
Screen Capture Save
Mini USB 5V power input
Signal Strength
Battery Capacity of Transmitter
Battery Capacity of Receiver
Inspire View: This shows an overview
of the scene from the internal Inspire camera,
independent of the DSLR.
DSLR LiveView: Mimics the LCD screen
of the DSLR. This mode displays a low-resolution
version of the image taken by the DSLR.
Setup Camera for shoot
In camera menu settings, set Video Output
to NTSC (see camera manual for details).
Set the camera to image playback time 4-8
seconds.
Switching on your Inspire LiveView
Remote Control
Ensure the camera and remote control receiver
are turned off before connecting.
Insert 4 x AA batteries into the Inspire transmitter &
receiver.
Attach the Inspire receiver firmly to the hot shoe on the
camera.
Choose correct remote control cable
for your DSLR
& connect this cable to the Inspire receiver & DSLR.
Connect the video jack (usually yellow) of your AV cable
(supplied with your camera) to the Video socket of your
Inspire
& connect the other end to the AV output on
your DSLR.
Note: Inspire is not HDMI compatible.
Fold the AV cable (supplied with your camera) into the
handy pouch provided.
Switch on the Inspire receiver, camera &
transmitter. Once you have switched on the
Inspire, the transmitter & receiver automatically
synchronise, showing the Inspire View.
When not in use, switch off transmitter to conserve
battery power.
Note: Inspire can still be used without an AV cable.
Setup Camera for shoot
Setup Photo Subject.
To view settings on DSLR LCD, you may need to
disconnect the AV cable from the DSLR.
Adjust camera settings: zoom, position of photo subject,
focus subject, shutter speed, aperture etc.
Shutter Release
1/2 Press to autofocus - if autofocus is enabled on
the DSLR lens
Full press
for shutter release.
BEFORE Taking Photo
If your camera has LiveView switched ON, the Inspire
view or DSLR LiveView images can be viewed on the
transmitter.
Use button
to switch between each view.
If your camera has LiveView switched OFF or does not
have a LiveView function, the Inspire image can be
viewed on the transmitter.
DSLR LiveView image cannot be seen and will give you
a blank screen if selected.
16
12
12
D
6
7
8
B
A
E
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
IRL/GB